ACCON-COM-Cable USB

S5 adaptor with USB Connection. The ACCON-COM-Cable USB is an adaptor to connect a PC with a S5 PLC. It is fed via USB. Therefore, an external power supply is not necessary.

Tillverkare: DELTA LOGIC

Artikelnr: 10203-USB

Kabel längd

Product information "ACCON-COM-Cable USB"

S5 adaptor with USB connection

The ACCON-COM-Cable USB is an adaptor to connect a PC with a S5 PLC. It is fed via USB. Therefore, an external power supply is not necessary.

Perfect fields of application

As programming adaptor to create and change the PLC program
As communication adaptor for visualizations
As communication adaptor for accessing the PLC's data

Varied ranges of application

Programming a S5 PLC, e.g. with ACCON-PG or the Siemens STEP 5 software, on a notebook without RS-232 interface
Connecting visualizations to S5 PLCs

Convincing and varied

The included software creates a virtual serial interface. Each software supporting a serial connection to the S5 PLC can therefore use the ACCON-COM-Cable USB.

Technical highlights

Connection via USB
No separate power supply necessary
Even usable with STEP 5

Technical Details

Supported operating systems	Windows 2000, XP, 2003 no 64-Bit versions
Connection to the PC	USB connection cable stationary mounted, 3 m or 5 m depending on model
Connection to the PLC	TTY with 15-pin SUB-D plug
Supported PLCs	S5 of the U-series
Protection type	IP 20
Supply voltage	Via USB
Galvanically isolated	No
Extension possible	Yes, max. 10 m USB extension